UVC germicidal lamp testing : The Prodigy Generation Prototypes

Mr. Pairoj Rattanangkul, Head of Acoustics and Vibration Group, Dr.Patchariya Petchpong, Metrologist Professional level and Mr.Pollawat Jumparuang, Mr.Natthapong Damduang and Mr.Chayut Charoenkit, Metrologist of Light and Color Group, Thermometry and Optical Metrology Department tested the performance of UV germicidal lamp and electrical safety analyzer which were three original The Prodigy Generation Co., Ltd.’s prototypes. The company desires to contribute the lamp to general hospitals and governmental agencies as public interests.

 

 

 

 

 

 

 

 

 

 

International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer.

Seminar under the Project of Potential Industrial Competitive Enhancement on Regional Medical Hub

Mr. Anusorn Tonmuanwai, Deputy Director of NIMT opened a five-day long seminar under the Project of Potential Industrial Competitive Enhancement on Regional Medical Hub with International Standards and gave his opening speech to NIMT staff and participants from the public and private sectors. The seminar was held at NIMT, Phatum Thani province between 22 – 26 June 2020. The seminar’s topics were scheduled as followings; 

Date/Topic
22 June 2020 

– Introduction by Mr.Kaokla Suchai, GM of Trea Med Co., Ltd.
– Electrical Safety Analyzer and Electrical Safety Test and IEC Standard and Electrosurgical Analyzer and Electrosurgical Unit Test by Mr.Ponsorn Saengtan, Senior Service Engineer & Electrical Safety Analyzer                  Trainer

23 June 2020 

– Defibrillator Analyzer and Defibrillator/AED test by Mr. Saharat Phetprasert
– Vital Sign Simulator and ECG, SpO2, NIBP and Vital Sign Monitor Test by Mr.Panupat Nuchin

24 June 2020

– Incubator/Radiant Warmer Analyzer and Incubator Test ,and Fetal Simulator and Phototherapy and Radiometer and Fetal Monitor test by Mr.Panupat Nuchin

25 June 2020 

– Gas Flow Analyzer + Vapor and Ventilator Test and Anesthetic Test, and Infusion Pump Tester and Infusion Pump/Syringe Pump Test by Mr.Panupat Nuchin

26 June 2020 

– QA Tools and Dose Safety on X-Ray, US, NM, MRI by Thapat Phitakparadorn, Technical Sales Engineer

– Rigid Scope and Fiber Optic Tester and Fiber Optic Test, Master Laboratories Test Equipment, IEC, MDQA and ECRI by Mr.Sakchai Suchai, MD of Tread Med Co., Ltd.

 

The aim of this seminar was to daft a manual on Calibration, Measurement and Verification for Medical devices.

Mr Sakchai Suchai, MD of Tread Med.

Mr. Anusorn Tonmuanwai, Vice Director of NIMT

Group photo

Workshop: Defibrilator Analyzer and Defibrillator/AED Test by Mr.Saharat Phetprasert

 

 

 

 

 

 

 

 

 

 

 

Product Specialist, Mr.Panupat Nuchin

Electrical Safety Analyzer

 

 

 

 

 

 

 

 

International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer

Opening a new service: Pressure Metrological Traceability Chain of Ventilator Machine

A ventilator, aka “Breathing machine” is a machine that some COVID-19 patients need help to breathe. It is used to aid the function of the lungs to blow air into the lungs, helping to maintain proper levels of oxygen in the blood.
NIMT realizes that the standard measurement for the machine is highly important. In order to reduce a risk from any errors and treatment. Therefore, NIMT opens a new calibration service for the ventilator so far.

 

Should you have any enquiries, please contact;
Mr. Likit Sainoo, Group leader of Fluid Mechanics
Email: likit@nimt.or.th

Dr. Patipat Wongthep, Metrologist, Professional level (Fluid Mechanics)
Email: patipat@nimt.or.th
Tel: +6625775100 ext 2205

Or any assist about the international relations, please contact us, the International Relations Office (IRO);
Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer Email: IRO@nimt.or.th

“Metrology” , the knowledge of measurement by The Standards (Thai clip)

On 12 June 2020, Mrs. Ajchara Charoensook, NIMT Director, has an interview to The Standards, a powerful online media in Thailand, on “Metrology” , the knowledge of measurement  that is able to whether prove and verify  products or innovations to be up to the standard or not.

Please kindly enjoy watching and follow us next coming show.

https://www.facebook.com/thestandardth/videos/854160048439229/


International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officers

NIMT medical working group on a field trip to Draeger Medical (Thailand) Ltd.

The NIMT medical devices’ calibration, measurement and traceability drafting working group went on the official field trip to Draeger Medical (Thailand) Ltd., at the head office, Bang Na, Bangkok on June 11, 2020.

NIMT medical working group on a field trip to Draeger Medical (Thailand) Ltd.

The company manufactures and distributes Anaesthetic Machine.  

The aim of this trip was to gain knowledge that would be able to apple for the drafting further.

International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer.

The Project Proposal Preparation Meeting for Establishment and Technology Transfer on Medical devices

Mr. Anusorn TONMUANWAI, Deputy Director of  NIMT, opened the project proposal preparation meeting for Establishment and Technology Transfer on the Standard of Measurement, Calibration and Testing on medical devices. The medical devices’ stakeholders and experts attended this meeting to assemble the project proposal at the central administration office, NIMT on 10th of June 2020.

Mr. Anusorn TONMUANWAI, Deputy Director of  NIMT

Participants

The aims of the project are to train measurement method, national measurement standards for medical devices, and to incubate an academic ability in the dimension of medical metrology. The project plans to support and integrate with educational institutes and related agencies to transfer knowledge and technology about the medical metrology further.


International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officers

Making-merit for the 22nd anniversary of Foundation’s day

Mrs. Ajchara Charoensook, NIMT Director as the chairman of Buddhist making-merit ceremony on the occasion of 22nd anniversary of NIMT’s establishment.
In this event, Mr.Anusorn Tonmuanwai, Vice Director, Flg. Off. Uthai Norranim, Assistant Director, and NIMT staff attended the ceremony together at the central administration office building, NIMT.

Director lighted joss sticks and candles to pay homage to the Triple Gem.

 

A monk sprinkled holy water.

 

NIMT staff attended this event.

 

News by PR NIMT; http://www.nimt.or.th/main/?p=31661 (in Thai)

International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officers.

NIMT gives knowledge for the Coronavirus (COVID-19) sterilizer at Thammasart University hospital.

Mr.Praman Chantaraksa, Engineer, Senior Professional Level from the Department of Innovation and Measurement Tools Development, Mr.Chayut Chareonkit, and Mr.Nuttapong Damduang, Metrologist, Practitioner Level from the Department of Thermometry and Optical Metrology were invited for giving knowledge for the Coronavirus (COVID-19) sterilizing devices by Thammasart University hospital.

Recently, NIMT cooperated with the hospital to invent the metrological devices that measured accurately in the laboratory. The objectives of giving knowledge were to introduce a safe usage of the devices by international standards and to provide metrological knowledge to the public. This event was highly successful and a good performance between both institutes.

Mr.Praman Chantaraksa, Mr. Chayut Chareonkit and Mr.Nuttapong Damduang

 

Mr.Chayut Chareonkit, Metrologist, Practitioner Level from the Department of Thermometry and Optical Metrology

 

Thammasart Univerisity hospital nurses

 

Sterilizier

 

Thai version news by PR NIMT, http://www.nimt.or.th/main/?p=31635

English by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer

Online training courses on “Requirement of Measurement Instrument Control System toward ISO 9001 ISO17025 ISO14001 and ISO18001” Batch 3

NIMT set up online training courses on “Requirement of Measurement Instrument Control System toward ISO 9001 ISO17025 ISO14001 and ISO18001” Batch 3 for training attenders from public agencies, private sectors, and related industrial.

The Course trainer is conducted by Dr. Monthol Homklintian, Metrologist Senior Professional, Direct Current, Low Frequency, High Frequency and Electromagnetic Fields Group, the Electrical Metrology Department.

The aims of courses are 1) to recognize the National Quality Infrastructures (NQI) and Metrology system, 2) to realize the importance of precision, accuracy and tractability and 3) to understand the process of evaluation on uncertainty and requirement of ISO 9001 ISO17025 ISO14001 and ISO18001.

For more information, please visit PR NIMT news.

 

Dr. Monthol Homklintian, Metrologist Senior Professional, (Trainer)

 

On air from NIMT

 

NIMT Online Course

News by PR NIMT: http://www.nimt.or.th/main/?p=31595

International Updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer

NIMT Metrology technology supports anti-COVID medical devices to the hospital

Due to the outbreak of COVID-19, a number of patients are rapidly increasing worldwide. The patients are generally admitted to the hospital. Not only the patients are rick to the COVID-19, but medical workers in the hospital face to a high risk to infected with the COVID-19 as well.

Assistant Professor Dr.Pharuhat Tor-Udom, MD., Assistant Financial Director of Thammasart University hospital and Deputy Director of NIMT Mr.Anusorn Tonmueanwai

With this important reason, National Institute of Metrology (Thailand) (NIMT) recognizes this issue and initially made a cooperation with Thammasart University hospital, Phatum Thani province, as public agencies under the Ministry of Higher Education, Science, Research and Innovation (MHESI), to invent accurate metrological measurement devices in the international level laboratory for this medical support.

Deputy Director of NIMT Mr.Anusorn Tonmueanwai, and Assistant Director of NIMT Flg.Off. Uthai Noranim and NIMT metrologists

As said above, NIMT has invented and adapted 3 types of medical devices; 1) 2 patient room and field-hospital UV-C sterilizers that are working well in specific areas such as patient beds.

Patient rooms and field hospitals UV-C sterilizers

Medical Portable Germicidal Lamp

Hospital sterilizers

2) 2 ambulance UV-C sterilizers: In order to make sure the ambulances are aseptic and safe, the sterilizers have been tested that the light intensity is suitable for the ambulance size. All works well with the ambulances. Moreover, it can be applied for other types of rooms such as restrooms and small patient rooms.

Ambulance sterilizers

and, 3) 15 UV-C sterilizers that adapted from microwaves or Microwave sterilizers by putting germicidal lamps inside the microwaves. All instruments have been tested to electrical safety towards the international standards.

UV-C sterilizers that adapted from microwaves

Microwave UV sterilizers

On this occasion, Deputy Director of NIMT Mr.Anusorn Tonmueanwai, and Assistant Director of NIMT Flg.Off. Uthai Noranim and their staff attended this instrument delivery event to Assistant Professor Dr.Pharuhat Tor-Udom, MD., Assistant Financial Director of Thammasart University hospital at the 1 floor hall, M.R.Suvaphan Sanitwongse Building, Thammasart University, Phatum Thani province. With those devices, the medical workers will be confident and carefree themselves to work safely. Finally, the mutual objectives of 2 agencies will be achieved and will be a part to reduce the effect and infection from the COVID-19.

 


International updated by Natthaphon Jarat and Thanakporn Nonthachart, International Relations Officer.